Seized Filling Loop Tap | UK Plumbers Forums | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Seized Filling Loop Tap in the UK Plumbers Forums area at Plumbers Forums

Messages
32
Hi, any ideas on how I can get this seized tap to turn? I can get it replaced in a couple of weeks but I need to fill the boiler as the pressure is on the low side. Any ideas what size they are so I can have it ready for the plumber when he comes?
 

Attachments

  • pipe1.jpg
    pipe1.jpg
    576.2 KB · Views: 56
  • pipe2.jpg
    pipe2.jpg
    669.8 KB · Views: 26
You are turning the right way ? I only ask as it will only turn one way the lever / handle has stops if you look you will see it hard against the closed one

Worst comes to the worst undo the screw that holds the handle on little pozi and remove the handle use a set of pliers to grab the brass flats and slowly turn it unit you hear water flowing and keep an eye on the pressure guage and Remember to turn it off eg flats horizontally
 

Similar plumbing topics

  • Question
Yep spot on
Replies
3
Views
517
  • Question
Have successfully change the first one...
Replies
11
Views
1K
  • Question
Many thanks for your advice I will get up into...
Replies
3
Views
515
  • Question
Thanks for the suggestions, I've attached a...
Replies
3
Views
1K

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.

Back
Top