Filling Loop brand to try thats better quality than off the shelf | Central Heating Forum | Plumbers Forums
Guest viewing is limited

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Filling Loop brand to try thats better quality than off the shelf in the Central Heating Forum area at Plumbers Forums

Scott_D

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
6,128
Can anyone recommend a good quality filling loop brand?
They all seem to be cheap and flimsy with plastic handles.

Altechnic is ok I find, the water side is good with a nice metal handle, the heating side is poor.
 
I've used a decent double check valve, two lever valves and the flex for older customers who struggled with the small valve handles. works well.
 

Similar plumbing topics

I normally give them a turn on every service...
Replies
3
Views
49
I have a home with an oil boiler in a garage...
Replies
0
Views
661
    • Like
From this post, I think you’ve got a good...
2
Replies
47
Views
6K
  • Question
OK, I'm spotting a theme here :) Thanks...
Replies
4
Views
5K
  • Question
Correct. Bleed from bottom up to allow air...
Replies
3
Views
1K
Back
Top