ecotec pro 24 blackscreen | Gas Engineers Forum | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss ecotec pro 24 blackscreen in the Gas Engineers Forum area at Plumbers Forums

phil hair

Gas Engineer
Messages
42
ecotec pro 24, the display screen goes blank after about 10-15 seconds and boiler is completely dead. isolate it for a couple of mins and it comes back on and repeats.
dont do much on these, so is it the board, or will a dodgy component do this to the board?

Im thinking the fan, so pump runs, but nothing else.

only went to unblock the condensate, turns out was leaking from the filling loop, all was fine until i plugged it back in again.

thanks..........
 
Did you turn it off ?
 
Will only last a day or too
 

Similar plumbing topics

Thanks @scott_d It has, its a low drone but...
Replies
5
Views
1K
A
TRVs open? Any other valves been touched?
Replies
7
Views
3K
  • Question
Did you manage to resolve what it was?
Replies
13
Views
4K
Odatmi
O
Suggest changing the Kw from Auto to 6kw, also...
Replies
11
Views
2K
Keep a diary recording the dates/times of when...
Replies
5
Views
3K
Back
Top