Capping a redundant gas cooker supply | Gas Engineers Forum | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Capping a redundant gas cooker supply in the Gas Engineers Forum area at Plumbers Forums

Messages
1
Hi, I’m having a gas cooker pipe capped off. The GS registered plumber/ fitter, has told me that to do this, he’ll also have to service the combi boiler and check the radiators. (combi boiler was serviced in January by the original installer) Before retiring I was a joiner and honestly in the building trade, I’ve never heard of any plumber saying he’s got to service a boiler after capping off a redundant cooker supply. Nor can I see the need to “check the radiators” ( absolutely not on the gas side of things)
Do you think he’s trying it on ? The quote is roughly £100 to cap a 15mm pipe off btw.
Thanks in advance
John
 
That's crap. There is a procedure for re-lighting gas appliances after he's capped the cooker supply but it's only visual

  • Flame picture (if applicable)
  • Location of the appliance
  • Flue is OK and suitable
  • Adequate ventilation
  • Signs of distress (heat damage or discolouration in surrounding area)
  • Stable and Secure (boiler isn't falling off the wall)

Realistically to do it properly, get tools out test and fill out paperwork you're looking just short of an hour.
 
That's crap. There is a procedure for re-lighting gas appliances after he's capped the cooker supply but it's only visual

  • Flame picture (if applicable)
  • Location of the appliance
  • Flue is OK and suitable
  • Adequate ventilation
  • Signs of distress (heat damage or discolouration in surrounding area)
  • Stable and Secure (boiler isn't falling off the wall)

Realistically to do it properly, get tools out test and fill out paperwork you're looking just short of an hour.

He might call the 26.9 checks a service
 
If he's cautious, the plumber will want to test the boiler and heating are working properly before starting work so he doesn't get stiffed by a dodgy customer claiming that he was responsible for a pre-existing fault.
 

Similar plumbing topics

Ok I think I see what your saying mate, So...
Replies
9
Views
812
Yeah but they don't always just detect Natural...
Replies
10
Views
2K
We've just sorted one of these situations...
Replies
9
Views
1K
Thanks for advice.
Replies
3
Views
945
you should have acess to the main meter at all...
Replies
15
Views
4K
Back
Top