Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

View the thread, titled "Cant adjust Danfoss pressure am I using correct ports?" which is posted in Oil and Solid Fuel Forum on Plumbers Forums.

I have a SIP space heater and fitted a new matching spec oil nozzle as part of a service on it.

I wanted to check the pump pressure with the new nozzle and its difficult to be sure what port to connect to.

And that these pumps are definitely adjustable! I turned an Allen screw which is not tight so I presume it's the pressure adjuster and after 1 full turn the gauge stayed at 22psi. Spec says 28psi.

Do I keep adjusting or what do you guys think?

20231027_174548.jpg
20231027_174539.jpg
Above top screw is the only one which appears adjustable.

20231021_151310.jpg20231021_131622.jpg20231021_130911.jpg20231021_130917.jpg
 

Reply to the thread, titled "Cant adjust Danfoss pressure am I using correct ports?" which is posted in Oil and Solid Fuel Forum on Plumbers Forums.

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.

Weekly or Monthly Email Digest

Back
Top