Boiler Programmer | Central Heating Forum | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Boiler Programmer in the Central Heating Forum area at Plumbers Forums

Messages
2
I have a wall mounted thermostat which is connected to a 26 volt supply from my Glowworm 24ci boiler.
I would like to replace this thermostat with a programmer so i can time when the heating comes on and off.
Currently the heating is turned on/off using the thermostat.
Can the thermostat be replaced with a programmer that works off this 26 volt supply or is a mains supply required.
Any suggestions which programmer i should use.
Thank you
 
Eph cp4b
 

Similar plumbing topics

So I've used a wireless thermostat to activate...
Replies
0
Views
2K
I have a home with an oil boiler in a garage...
Replies
0
Views
692
Hi, I am trying to link a Hive heating & hot...
Replies
0
Views
646
That should do it. I have Heatmiser rf...
Replies
8
Views
2K
D
Sounds like you need somebody competent to...
Replies
2
Views
1K
Murdoch
M
Back
Top