service

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

service

  1. Atkinson Equipment Ltd

    Atkinson Tanktop general info & service advice

    Hi all, we spotted threads on this forum, thought it would be good to create a general thread with some useful advice and service info. Top off take systems are a bit more complex than standard gravity feed and often certain service aspects are overlooked causing issues down the line....which...
  2. Electricians Forums

    Electric & Electrical | Anyone know of a repair service for Axpert inverters

    Anyone know of a repair service for Axpert inverters{/b} Hello All I have an Axpert MKS 4 (conversol Re badge) 5.5 Kw inverter that I have had in and running for a little over a year. From the start it played up and I had a couple of f12 dc-dc overcurrent faults that re set and carried on...
  3. B

    Yearly service check

    Just had a new worcester bosch. 1000 combi boiler to replace 18yr old vokera. No problems with new boiler. Enquiring about yearly maintenance / safety check and service i £19.00. per month, £228 one off yearly payment. It includes parts and labour if needed. As new boiler is under warranty...
  4. C

    Trying to find O ring for Mira 723 and not a whole service kit

    Hi Everyone, Does anyone know where to find out what size the O rings are in a Mira 723 service kit as I have one (at the pointy end of the piston/spindle) that keeps failing and I cannot afford to keep spending £23 to get one O ring. It is part "G" on the 723 instructions. Any help very...
  5. N

    gas service pipe under slab

    I have decided to remove the timber floor boards and joists as they are effected by damp and rotting. Was hoping to infill and have slab and screed floor. There is a gas servile pipe under the floor which enters the property below the joists at the front of the house and comes up under the...
  6. C

    Service old boiler vs buying new

    Hi everyone! Parents not used the boiler since 2013/2014, since installing a new wetroom for them they have now decided its worth getting the boiler running again. The only reason it has not been used i so long is the the zone valve kept getting stuck (would have fixed this myself if i knew!)...
  7. R

    Boiler Service failed today despite previous 3 passing it

    Hi need some advice on this odd story, I had a Bosch boiler installed just over 2 years ago by Governments home energy scheme. The company passed all checks, provided certs etc. The government/Green scheme sends 2 other gas boiler engineers to double and triple check things and One was Bosch...
  8. V

    Gas Boiler service Cost

    Hi All, what's the cost of a service for an unvented system ? (valiant boiler & mega flow cylinder). I was charged £320.00, for the following: Boiler service - no parts changed. Change wireless thermostat (honeywell to Tado), I supplied the thermostat starter kit. is that about correct ? Also...
  9. H

    Vaillant ecotex 831 - heating only working in service mode

    Wishing everyone on tgmhis forum a very happy Christmas!! I am working on a combi boiler which has problem with heating only. Water is heating normally. Here are the symptoms 1. Signal from thermostat is not firing the boiler. It does not make any sound when heating is on from thermostat. 2...
  10. G

    annual boiler service

    I recently had a service on my worcester bosch boiler by Warmserve supposedly reputable which is under guarantee and before the service I had no problems but straight after the service I had a leak from the boiler which when the service engineer came back told me I needed a new condensate trap...
  11. N

    Service/isolating valve for outside tap -- need advice

    Hello guys, a couple of months back I installed a new shower and sink into a part of the house that hadn't previously been plumbed in. This forced me to run some pipes outside the walls, so I put in stopcocks at the point where the new pipework joins the old Just In Case. I used copper pipe and...
  12. R

    Boiler service/ gas safe course

    Hello, I am looking for an honest opinion please, with my current employment I get a lot of time off, I am considering completing a gas safe course with the view to use my spare time to potter about doing boiler services and that only, am I naive to think it’s that simple? Thanks
  13. S

    Vaillant "Service Heat Generator" Message

    I have a Vaillant Ecotec Plus combi boiler that was installed just over 6 years ago. It has been serviced annually, the most recent service being about 2 months ago. The controller is a Vaillant VRT 350f wireless type. Recently a spanner symbol and a “Service Heat Generator” message have...
  14. sultan mahmud

    How to rank my plumber service website?

    I have opened a website now how can I get customers from now on
  15. O

    brass, stainless, or EP/plastic for Well service line fittings

    Where the black polyethelene service line enters this particular structure is by far the most freeze-prone area. The structure is an elevated "mini house" with an insulated, heat-taped plenum taking the poly from below frost line up into the space between floor joists. But, power outages...
  16. R

    Where can I buy this exact isolation/service valve?

    The isolation valve connected directly to our toilet fill valve has started to leak (I assume the washer has deteriorated). I'd like to get a like-for-like replacement so that I can just do a straight swap of the entire isolation valve without having to worry about resizing pipes, but my google...
  17. C

    Problem with service valve connection

    Hi - I've replaced the service valve on the water feed to my toilet. It's screwed on fine on the bottom but the top connection to the nylon fitting doesn't screw on. If I remove the plastic washer it will screw on but it doesn't seal. It won't even fit on with the old washer, which is flattened...
  18. C

    Hot water service in home

    Please forgive the length of this post, but I must provide all the information to fully explain the issue. I am completely perplexed! My 43 year oldhome is in the country, on a well. Recently, I had a 20+ year old 40 gallon propane hot water heater professionally replaced. The house service line...
  19. D

    Gas Boiler Service Query

    Hey all Looking for a consensus on an issue that has arisen. Disclaimer is that my ideal icos 12 boiler Is over 10 years old but has been serviced. It has been presenting intermittent flame issues in sub zero temperatures however I found that insulating the pipe work around the gas regulator...
  20. T

    Heating eng` required in Fife to service a 3 year old Vogue combi C40

    I`m looking to hire asap. I feel the heating isn`t heating the room(s) up as quickly as they used to. I have about 16 radiators but only really use 4-5. The rest sit on frost free. I bled them all and apart from the bathroom towel warmer that hissed a little, all were fine. Went away 2 weeks...
Back
Top