DAVE01

Yes Replace the pump I would say the Pump was sticking that is why the service Guy gave it a Bang with a spanner . And upstairs was heating by gravity you had heating upstairs and hot water I would say . What some times can happens the...

Some of those Verticals Rads Have the Flow and Return are on Different ends Try and find out the make of your Vertical Rad is get on to the manufactures they will tell you what way it has to be piped weather the flow is on the left or...

Take a look at the ideal vogue It has two relays For switching or use a w plan you can have both heating and hot water on at the same time but you can use a 3 way divirter valve This will get PHHW and when satisified It changes over to...

Hi everyone, I have a customer who needs a new system boiler, currently has a 22kw which I've roughly calculated as enough heat output for the heating (its a 6 bed victorian terrace house), but this doesn't take the 200l unvented...

Thanks buddy, it was done by a plumber originally (clearly not a very good one).

Just looking at your Photo The conection is not a patent joint You should use a Rubber Conection were it joins the red earthin ware Pipe to the PVC bend or another solution is to use what is Called a 6x4 tipple in Pvc Put the 6inch part...

Yes its Clowns like this that get Plumbers a bad name . Go to your local Plumbers Merchant and buy a 15mm stopcock the size of the water mains is either 15mm 0r 22mm but it can be reduced to 15mm under the kitchen sink to feed the cold...

If it was the expansion pipe from the old boiler to the feed and expansion tank in the loft, which is what it sounds like, this will have had the central heating water and chemicals in it for years. Do not use this for domestic hot...

Most of the combi boilers that are installed in the UK there is a kit that most installers use like a heating filter and a water mains filter maybe and just maybe that the mains filter is faulty in some way maybe there is a break down...

If it's a vissmann combi boiler get in touch with vissmann they should be able to tell you unless there is a breach some were between the heating heat exchanger and the hot water heat exchanger it could and might be the additive that...

if you have a flexible pipe to the mixer set on your sink the pipe that connects to the flexible pipe on the sink could be kinked like bent over as a result this is how you have no hot water .if you have a hot connection at the washing...

By looking at your question it sounds to me that the accuator on top of the 3way valve is giving trouble or faulty or your programmer is possibly faulty but if the boiler is fireing you should be able to turn on the valve manually to...