Water Underfloor Heating Advice | Water Under-floor Heating Installers

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Questions and plumbing advice in the Water Underfloor Heating Advice - Water Underfloor Heating Advice Forums for Wet Underfloor Heating Installers. Find which products are best for your floor. Find what depth everything needs to be buried at. CAD drawings for Water Underfloor Heating..
Normal Threads
Do people with this type of mixed flow temperature control have any problems with achieving the...
Replies
3
Views
2K
Similar to radiator dT's, is there a way to mathematically calculate the UFH pipe centres...
Replies
1
Views
323
We have a three zone heating system plus water cylinder (OSO Super S 250L) on an Valliant EcoTec...
Replies
3
Views
515
I have some strange noises coming from the system, the majority are caused by the flow meters...
Replies
2
Views
607
Hi all. I've currently got a system boiler with cylinder and rads on s-plan. I'm planning on...
Replies
3
Views
674
S
Hi. We have recently bought the ground floor of a Victorian house, about 100 m2. The floors are...
Replies
3
Views
723
Hi, I have a seaside apartment in Azerbaijan, currently a bare core & shell, not even internal...
Replies
4
Views
682
Hello I'm looking at the different pipes for UFH, the prices vary a lot and I'm not sure about...
Replies
3
Views
785
Hi I have a 4 zone / 7 loop UFH system. 2 zones (4 loops) always get hot when the system is...
Replies
14
Views
2K
Two loop UFH system heating 24M2 with lots of glass. Loop lenghts 90M each X 16MM OD piping...
Replies
4
Views
805
We have a Daikin Air Source heat pump feeding our hot water and under-floor 8 port manifold...
Replies
0
Views
577
I have two adjoining cottages, each with an identical UFH system downstairs. Both been going...
Replies
1
Views
760
bit of an odd one. UFH been working fine for about a year or two now. today the pipes going to...
Replies
2
Views
699
I have a Neura heat pump and my thermostat has failed (Theben RAM 797 b). I'm looking to replace...
Replies
1
Views
619
Hi folks, hoping someone can help with a problem that's been perplexing me since just before...
Replies
19
Views
2K
Hi, I have a 3 storey house built in 1904. We put UFH in the house about 20 years ago. Works...
Replies
0
Views
619
I'm attending a wet underfloor heating system, it's an old one ..No flow meters, just adjustable...
Replies
3
Views
791
G
HI folks, is it possible/feasible/reasonable to insatll an ufh manifold and system (for a 17m2...
Replies
2
Views
769
Hi, I have an 1904 redbrick 2,500 square feet house. We have UFH on every floor. 3 Floors House...
Replies
1
Views
703
Can anybody identify the make of this divertor valve. Actuator is missing!! Cheers.
Replies
4
Views
877
Hi guys. Just bench testing my wiring centre. It all performs as it should but the relay makes a...
Replies
9
Views
978
Evening all, I’m currently in the process of refurbing my house, and have opted to wet UFH for...
Replies
7
Views
798
Hi there, I'm considering having my heating system controlled by Honeywell Evohome. I have a...
Replies
4
Views
1K
  • Question
Hi guys, I have a set up with rads upstairs and UFH downstairs. I have installed the manifold...
Replies
16
Views
2K
Hi will be using 12x1.6mm MLC for a project and would like to terminate into a fitting other...
Replies
4
Views
797
Hello I'm new to the forum and wanted to ask a question after having a good read. House is...
Replies
5
Views
1K
E
I have preformed a Factory Reset and re-calibrated the Thermostat. Can anyone tell me if I now...
Replies
2
Views
1K
Morning, Doing some work on our UFH manifiolds and was wondering if anyone would be kind enough...
Replies
5
Views
945
  • Question
HI, we have replaced 3 manifolds (1 upstairs 2 downstairs) with new Warmup units. The...
Replies
6
Views
1K
Hi, we had UFH installed dowstairs in our house recently, and I'm not 100% sure that it's...
Replies
7
Views
1K
Post a New Thread / Question

New Threads

Back
Top