-
We recommend uHeat for Underfloor Heating Systems, and The Wetroom Store for all things bathrooms and wetrooms. They provide discounts for forum members.
Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
Questions and plumbing advice in the Commercial and Industrial Plumbing Forum - .
Normal Threads
Hi chaps I have a as new Ali plug cock key this is a big piece of kit for larger commercial fed...
- king of pipes
- 0
- 948
- Latest:
- king of pipes
Hi all.
I just wondered whether any of you are currently doing any site work on a price?
Only...
- macka09
- 1
- 1K
- Latest:
- ShaunCorbs
We have a Grundfos for a domestic water booster application. Everything is set up for constant...
We are using a the rigid 65s pipe cutter for the smaller stuff but we have a load of 88.9mm x...
Does anyone in here have their commercial catering tickets? I have a job in London to connect...
- mfgs
- 0
- 100
- Latest:
- mfgs
Hi guys. I’m on a job at the moment where the building has 100 flats over 4 floors. The problem...
Looking to replace a faucet with spray hose in a small commercial kitchen. we did have one...
- u8myufo
- 1
- 965
- Latest:
- ShaunCorbs
Anyone on here with their commercial gas tickets mind advising me on pricing. I have the...
- mfgs
- 1
- 141
- Latest:
- Last Plumber
Having a chat with colleagues on this one to decide on best route.
Existing 500L megaflo which...
- Marty92
- 9
- 2K
- Latest:
- ShaunCorbs
I am having to work on a concealed shower but there is no service valve and so I am having to...
- Illuminate
- 9
- 1K
- Latest:
- Timmy D
I have a WB 30i system boiler with a Honeywell programmable roomstat in the hallway and a...
- Mdljk
- 3
- 2K
- Latest:
- ShaunCorbs
Is there any tip what to expect from a commercial plumber?
Please let me know.
- Proflush
- 4
- 1K
- Latest:
- SimonG
Hello
Can anyone help me identify this actuator head. It’s making noise, heat not passing through ?
- Aiplumbinggas
- 2
- 940
- Latest:
- Aiplumbinggas
I have been asked to fit an external tap at a mental health facility to enable the external...
- Malcolm Greenhouse
- 15
- 3K
- Latest:
- Ric2013
I am looking at instructing a commercial gas safe registered and plumber to start works in...
- Hotelcontractor
- 3
- 2K
- Latest:
- mfgs
I am currently going through a career change to be a plumbing and heating engineer. I have...
- Illuminate
- 19
- 5K
- Latest:
- gmartine
Can someone point me in the direction of where to purchase high and low level vents for a...
- Steel Buttocks
- 4
- 4K
- Latest:
- Steel Buttocks
Been asked to wire up gas valve in pub kitchen and all the gas fitter has left is a stop button...
- Peterdevon
- 4
- 4K
- Latest:
- Last Plumber
Hello all.
I lease an industrial space in the United States, in which I will be doing...
Hello im a new member and hoping for some experienced advise
Im a plumber with 12 years...
Hi, what estimated size calorifier would be needed for a 5200 square meter college building.
Afternoon All,
I am thinking about upgrading and getting my commercial ticket. I keep losing...
- Jerry
- 4
- 2K
- Latest:
- Brambles
Hey
sorry if this is a silly question but can you go straight into a commercial gas course with...
- Luk3wb
- 24
- 4K
- Latest:
- Chuck
Hello, running pipe isn’t a standard part of my day to day as a power generation engineer but...
- Pjt101
- 1
- 2K
- Latest:
- ShaunCorbs
A bit random, but can anyone recommend a magnetic filter for 2" pipe?
We moved into our house in October and the boiler needs replacing. We got quotes but were...
Hi Everyone, I’m new to this site so not quite sure how it all works or if this is even in the...
Hi,
I'm a sparky. We are installing a couple of standard S plan control systems for a couple...
- Spud1
- 5
- 2K
- Latest:
- oz-plumber
I have a query regarding tightness testing to UP1a. Should the regulator be bypassed whilst...
- Nelly888
- 1
- 2K
- Latest:
- ShaunCorbs
Hi all,
I'm wanting to brush up on pipe sizing for H & C water services and heating pipework...
- Jim Goodenough
- 0
- 76
- Latest:
- Jim Goodenough
We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.
New Threads
-
To add a Negative or Positive pump? Same level as tank but showerHi, Had a bathroom renovation done, new shower...
- Started by Bignose2
- Replies: 1
-
Broken Sewer Pipe vs Clogged?Hi guys! The sinks and toilets weren’t...
- Started by Panther
- Replies: 2
-
-
-
-
New toilet syphon fill valve clunk noiseNever had water hammer clunk noise untill i...
- Started by astrofaux
- Replies: 0
-
-
-
Shower Valve Thermostat Fault?Hello, I fitted a shower last year that has...
- Started by vertexape
- Replies: 4
-
-
CT1 for shower tray ?Hi, I am thinking of using either white or...
- Started by landlordray
- Replies: 3
-
absorption pit questionHi, I'm not sure if this is the right forum...
- Started by simon84
- Replies: 2
-
Flexible connector not sealing around a new toilet outlet.I fitted a hew toilet which was fairly cheap...
- Started by gordonbell20
- Replies: 2
-
Adding radiator to bedroomsLong time no see…. A follow up to this rather...
- Started by Littlespark
- Replies: 4
-
Mystery catastrophic combi boiler leakHello, The other week was below freezing...
- Started by bureaucrazy
- Replies: 6
-
Mitras semi buried gas meter box - welded meter outlet fittingHello, I went to a job recently that had a...
- Started by RBG
- Replies: 4
-
Swapping concealed showerIs it possible to swap a concealed shower...
- Started by Matt0029
- Replies: 5
-
UK Viessman Vitodens 100-W weather compensationGood evening, I have a Vitodens 100-W (Type...
- Started by Jim Goodenough
- Replies: 10
-
What does this debris look like to you?We've recently done a power flush on a system...
- Started by Sergiu Grosu
- Replies: 2
-
blisters on flush valve sealHad a leaking flush valve in the cable...- Started by davidwf
- Replies: 3
